![]() ![]() ![]() In computing, booting is the process of starting a computer as initiated via hardware such as a button or by a software command. ![]() Select the “Secure Boot” option and choose the Enabled option.Īlmost every device with UEFI firmware will include Secure Boot, but if this is not the case, you will need to upgrade the system or consider getting a new computer that meets the Windows 11 requirements.Īfter you complete the steps, the computer should pass the hardware verification process to proceed with the in-place upgrade or clean install of Windows 11.For other uses, see Boot (disambiguation). To enable Secure Boot in the BIOS firmware, use these steps: If you are trying to perform a clean installation, you can skip the conversion, but this is a requirement if you are trying to upgrade from the Windows 10 desktop. Otherwise, the computer will no longer boot if you enable the newer firmware. If your computer uses the legacy BIOS, you first need to convert the MBR drive to GPT, switch to UEFI mode, and enable Secure Boot. Enable Secure Boot in BIOS for Windows 11 Otherwise, you must follow the steps to enable it inside the UEFI firmware. Once you complete the steps, you can continue with the Windows 11 installation if the security feature is enabled. Search for System Information and click the top result to open the app.Ĭlick on System Summary on the left pane.Ĭheck the “Secure Boot State” information and confirm the feature is turned “On.” (If not, you need to enable the option manually.) ![]() To determine whether Secure Boot is enabled on the computer, use these steps: Check if Secure Boot is present for Windows 11 However, you want to consult the motherboard’s manufacturer’s website to confirm that the support exists.Īfter you complete the steps, the Windows 11 check should pass, allowing you to upgrade the computer to the new OS. If the computer does not have a TPM option and this is a custom build, you may be able to purchase a module to add the support. If the motherboard doesn’t have a TPM chip and you are running an AMD processor, the module it’s may be built into the processor, and the option will appear as “fTPM” (firmware-based TPM 2.0) or “AMD fTPM switch.” If the device is an Intel-based system, TPM 2.0 will be available as Platform Trust Technology (PTT). Select the TPM 2.0 option and choose the Enabled option. Under the “Advanced startup” section, click the Restart now button.Ĭlick the “UEFI Firmware settings” option.Ĭlick the advanced, security, or boot settings page, depending on the motherboard. To enable TPM 2.0 in the BIOS to fix the Windows 11 installation, use these steps: Otherwise, if it reads “Compatible TPM cannot be found,” the chip is disabled on the UEFI, or the device doesn’t have a compatible Trusted Platform Module. If the computer includes a TPM chip, you’ll see the hardware information and its status. In the “Status” and “TPM Manufacturer Information” sections, confirm TPM is present and version. Search for tpm.msc and click the top result to open the “Trusted Platform Module (TPM) Management” tool. To determine if TPM is enabled for Windows 11, use these steps:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |